diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile
index 52d0d3c..20fbf6e 100644
--- a/board/ads5121/Makefile
+++ b/board/ads5121/Makefile
@@ -28,10 +28,6 @@
 LIB	= $(obj)lib$(BOARD).a
 
 COBJS-y	:= $(BOARD).o
-COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
-COBJS-$(CONFIG_PCI) += pci.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 6c40e94..405432c 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -216,7 +216,7 @@
 int misc_init_r(void)
 {
 	u8 tmp_val;
-	extern int ads5121_diu_init(void);
+	extern int mpc5121_diu_init(void);
 
 	/* Using this for DIU init before the driver in linux takes over
 	 *  Enable the TFP410 Encoder (I2C address 0x38)
@@ -239,7 +239,7 @@
 
 #ifdef CONFIG_FSL_DIU_FB
 #if	!(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
-	ads5121_diu_init();
+	mpc5121_diu_init();
 #endif
 #endif
 
@@ -329,104 +329,3 @@
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	debug ("init_ide_reset\n");
-
-	/*
-	 * Clear the reset bit to reset the interface
-	 * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
-	 */
-	immr->pata.pata_ata_control = 0;
-	udelay(100);
-	/* Assert the reset bit to enable the interface */
-	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-	udelay(100);
-
-}
-
-void ide_set_reset (int idereset)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	debug ("ide_set_reset(%d)\n", idereset);
-
-	if (idereset) {
-		immr->pata.pata_ata_control = 0;
-		udelay(100);
-	} else {
-		immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-		udelay(100);
-	}
-}
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-int ide_preinit (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	long t;
-	const struct {
-		short t0;
-		short t1;
-		short t2_8;
-		short t2_16;
-		short t2i;
-		short t4;
-		short t9;
-		short tA;
-	} pio_specs = {
-		.t0    = 600,
-		.t1    =  70,
-		.t2_8  = 290,
-		.t2_16 = 165,
-		.t2i   =   0,
-		.t4    =  30,
-		.t9    =  20,
-		.tA    =  50,
-	};
-	union {
-		u32 config;
-		struct {
-			u8 field1;
-			u8 field2;
-			u8 field3;
-			u8 field4;
-		}bytes;
-	}cfg;
-
-	debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
-		(u32)&immr->pata);
-
-	/* Set the reset bit to 1 to enable the interface */
-	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-
-	/* Init timings : we use PIO mode 0 timings */
-	t = 1000000000 / gd->ips_clk;	/* period in ns */
-	cfg.bytes.field1 = 3;
-	cfg.bytes.field2 = 3;
-	cfg.bytes.field3 = (pio_specs.t1 + t) / t;
-	cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
-
-	immr->pata.pata_time1 = cfg.config;
-
-	cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
-	cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
-	cfg.bytes.field3 = 1;
-	cfg.bytes.field4 = (pio_specs.t4 + t) / t;
-
-	immr->pata.pata_time2 = cfg.config;
-
-	cfg.config = immr->pata.pata_time3;
-	cfg.bytes.field1 = (pio_specs.t9 + t) / t;
-
-	immr->pata.pata_time3 = cfg.config;
-	debug ("PATA preinit complete.\n");
-
-	return 0;
-}
-
-#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */
diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile
index d6bfd59..022c676 100644
--- a/cpu/mpc512x/Makefile
+++ b/cpu/mpc512x/Makefile
@@ -22,11 +22,18 @@
 
 include $(TOPDIR)/config.mk
 
+$(shell mkdir -p $(OBJTREE)/board/freescale/common)
+
 LIB	= $(obj)lib$(CPU).a
 
 START	= start.o
 COBJS-y	:= traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o
+COBJS-${CONFIG_FSL_DIU_FB} += diu.o
+COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_diu_fb.o
+COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_logo_bmp.o
+COBJS-${CONFIG_CMD_IDE} += ide.o
 COBJS-${CONFIG_IIM} += iim.o
+COBJS-$(CONFIG_PCI) += pci.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/mpc512x/config.mk b/cpu/mpc512x/config.mk
index 5b7e1f2..6ab34b1 100644
--- a/cpu/mpc512x/config.mk
+++ b/cpu/mpc512x/config.mk
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2007 DENX Software Engineering
+# (C) Copyright 2007-2009 DENX Software Engineering
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -23,3 +23,7 @@
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
 			-ffixed-r2 -msoft-float -mcpu=603e
+
+# Use default linker script.
+# A board port can override this setting in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/cpu/mpc512x/u-boot.lds
diff --git a/board/ads5121/ads5121_diu.c b/cpu/mpc512x/diu.c
similarity index 91%
rename from board/ads5121/ads5121_diu.c
rename to cpu/mpc512x/diu.c
index 1dd60af..6d7e40f 100644
--- a/board/ads5121/ads5121_diu.c
+++ b/cpu/mpc512x/diu.c
@@ -27,10 +27,8 @@
 #include <command.h>
 #include <asm/io.h>
 
-#ifdef CONFIG_FSL_DIU_FB
-
-#include "../freescale/common/pixis.h"
-#include "../freescale/common/fsl_diu_fb.h"
+#include "../../board/freescale/common/pixis.h"
+#include "../../board/freescale/common/fsl_diu_fb.h"
 
 #if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
 #include <devices.h>
@@ -81,7 +79,7 @@
 		return (char *)h_addr;
 }
 
-int ads5121_diu_init(void)
+int mpc5121_diu_init(void)
 {
 	unsigned int pixel_format;
 	char *bmp = NULL;
@@ -91,7 +89,7 @@
 	yres = 768;
 	pixel_format = 0x88883316;
 
-	debug("ads5121_diu_init\n");
+	debug("mpc5121_diu_init\n");
 	bmp_env = getenv("diu_bmp_addr");
 	if (bmp_env) {
 		bmp = valid_bmp(bmp_env);
@@ -101,7 +99,7 @@
 	return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
 }
 
-int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
+int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
 			     int flag, int argc, char *argv[])
 {
 	unsigned int addr;
@@ -116,7 +114,7 @@
 		fsl_diu_clear_screen();
 		drv_video_init();
 #else
-		return ads5121_diu_init();
+		return mpc5121_diu_init();
 #endif
 	} else {
 		addr = simple_strtoul(argv[1], NULL, 16);
@@ -128,7 +126,7 @@
 }
 
 U_BOOT_CMD(
-	diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
+	diufb, CONFIG_SYS_MAXARGS, 1, mpc5121diu_init_show_bmp,
 	"Init or Display BMP file",
 	"init\n    - initialize DIU\n"
 	"addr\n    - display bmp at address 'addr'"
@@ -146,7 +144,7 @@
 	GraphicDevice *pGD = (GraphicDevice *) &ctfb;
 	struct fb_info *info;
 
-	if (ads5121_diu_init() < 0)
+	if (mpc5121_diu_init() < 0)
 		return;
 
 	/* fill in Graphic device struct */
@@ -189,5 +187,3 @@
 }
 
 #endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
-
-#endif /* CONFIG_FSL_DIU_FB */
diff --git a/cpu/mpc512x/ide.c b/cpu/mpc512x/ide.c
new file mode 100644
index 0000000..16f1a01
--- /dev/null
+++ b/cpu/mpc512x/ide.c
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	debug ("init_ide_reset\n");
+
+	/*
+	 * Clear the reset bit to reset the interface
+	 * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
+	 */
+	immr->pata.pata_ata_control = 0;
+	udelay(100);
+	/* Assert the reset bit to enable the interface */
+	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+	udelay(100);
+}
+
+void ide_set_reset (int idereset)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	debug ("ide_set_reset(%d)\n", idereset);
+
+	if (idereset) {
+		immr->pata.pata_ata_control = 0;
+		udelay(100);
+	} else {
+		immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+		udelay(100);
+	}
+}
+
+#define CALC_TIMING(t) (t + period - 1) / period
+
+int ide_preinit (void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	long t;
+	const struct {
+		short t0;
+		short t1;
+		short t2_8;
+		short t2_16;
+		short t2i;
+		short t4;
+		short t9;
+		short tA;
+	} pio_specs = {
+		.t0    = 600,
+		.t1    =  70,
+		.t2_8  = 290,
+		.t2_16 = 165,
+		.t2i   =   0,
+		.t4    =  30,
+		.t9    =  20,
+		.tA    =  50,
+	};
+	union {
+		u32 config;
+		struct {
+			u8 field1;
+			u8 field2;
+			u8 field3;
+			u8 field4;
+		}bytes;
+	}cfg;
+
+	debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
+		(u32)&immr->pata);
+
+	/* Set the reset bit to 1 to enable the interface */
+	immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+
+	/* Init timings : we use PIO mode 0 timings */
+	t = 1000000000 / gd->ips_clk;	/* period in ns */
+	cfg.bytes.field1 = 3;
+	cfg.bytes.field2 = 3;
+	cfg.bytes.field3 = (pio_specs.t1 + t) / t;
+	cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
+
+	immr->pata.pata_time1 = cfg.config;
+
+	cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
+	cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
+	cfg.bytes.field3 = 1;
+	cfg.bytes.field4 = (pio_specs.t4 + t) / t;
+
+	immr->pata.pata_time2 = cfg.config;
+
+	cfg.config = immr->pata.pata_time3;
+	cfg.bytes.field1 = (pio_specs.t9 + t) / t;
+
+	immr->pata.pata_time3 = cfg.config;
+	debug ("PATA preinit complete.\n");
+
+	return 0;
+}
+
+#endif /* defined(CONFIG_IDE_RESET) */
diff --git a/board/ads5121/pci.c b/cpu/mpc512x/pci.c
similarity index 100%
rename from board/ads5121/pci.c
rename to cpu/mpc512x/pci.c
diff --git a/board/ads5121/u-boot.lds b/cpu/mpc512x/u-boot.lds
similarity index 100%
rename from board/ads5121/u-boot.lds
rename to cpu/mpc512x/u-boot.lds